Fingerprint Access Controller &Reader

Attitude determines success or failure

Fingerprint Access Control

Model No.: CR-3613C



◆ small size design, easy to install;

◆ built-in reader module which can read card;

◆ wiegand output, integrate well with the standard access controller;

◆ can directly register and delete users on device;

◆ internal lock control, exit button, door sensor detection, standalone control mode.




Work Type: offline

Authentication Methods: Fingerprint, Mifare1 card

Identification speed: <1.0S

FRR (False Rejection Ratio): < 0.01%

FAR (False Acceptance Ratio): < 0.0001%

Fingerprint Capacity: 3000

Card Capacity: 3000

Screen: 2.4-inch TFT color screen

Communication Mode: RS485, U disk, TCP/IP

Operating Environment Humidity: 20%~60%

Operating Environment Temperature: 0℃~45℃

Display language: Chinese (traditional / simplified), English, etc.

Input: one group is door sensor input,one group is exit button input

Output: one group is lock control output

Alarm Function: anti-dismantle, door not close, force to open door, fire linkage, coercion

Wiegand Input/output: WG26/WG34

Power supply: 12V DC, Standby current: 50 mA, Working current: 400 mA

Door bell output: can connect one group wire door bell

Product Dimension: 105*105*30mm